350t/h aggregate hoister 4000kg/batch apshalt mixing machine with uniform and level weld joint
Main mixing building closure
The main mixing building as an optional part, whether to buy or not, Xitong guaranteed that environmental index of dust and asphalt gas will not be reduced.
The main mixing building and the whole stone elevator adopt containerized closed structure, quick and easy installation, beautiful appearance; Special wave-shaped Al-Zn alloy plating is used to make the sealing materials, no fading and no rusting for more than six years.
Each layer of the main mixing building is equipped with pressure interface, convenient to clean ash deposition, keep the interior clean and tidy.
The main mixing building was installed with ventilation system, facilitating heat dissipation. Good insulation and ventilation inside the main mixing building, internal ambient temperature ≤35 ℃
Xitong asphalt hot mixing plant adantages:
• 25 years' experience,
• China Engineering Academy Recommendation and we have academician working station,
• 1,500 sets of plants under service in the world,
• during these years, we only make asphalt plant,so we are professtional;
• we use a large number of imported cirtical parts(siemens, WAM, Germany Weishaupt and so on)- you can check the configuration list in the last pages of specification.
• 50 national patents and inventions.
our products are described as"compared favourably with European product" by Chinese Engineering Academy.
• Since the first set of asphalt mixing equipment export to Bangladesh in 1993,xitong asphalt mixing equipment took an important place in the world market and win good reputation,xitong products are exported to southeast Asia, central Asia, Middle East, Africa, America and other countries & regions. (Indonesia, Malaysia, the Philippines, Pakistan, Russia, Kazakhstan, Tajikistan, Turkmenistan, Qatar, Saudi Arabia, Eritrea, Ethiopia, Sudan, Libya, Algeria, Senegal, Guinea, Sierra Leone, Liberia, Cameroon, Tanzania, Zambia, Mozambique, Botswana and Colombia.
Main pollutants generated and estimated emission situation of equipments
| Emission point |
Pollutant |
Produced volume before treatment |
Discharged volume after treatment |
| Annual emission |
Emission rate |
Emission concentration |
| Gravel quarry, vehicle operation area pavement |
Dust |
2500t/a |
2t/a |
2 kg/h |
20mg/m3 |
| Asphalt batching plant |
| Asphalt unloading area, asphalt tank area, finished mixture loading area |
Asphalt fume |
0.279t/a |
0.0007 t/a |
0.00056kg/h |
0.056mg/m3 |
| BaP |
0.0015t/a |
3.75×10-6 t/a |
0.03×10-4kg/h |
0.30×10-4mg/m3 |
| NMHC |
1.2t/a |
0.003 t/a |
0.00024kg/h |
0.024mg/m3 |
| Burner |
Fume |
3679×104Nm3 |
3679×104Nm3 |
|
－ |
| SO2 |
0.108 t/a |
0.108 t/a |
|
2.9mg/m3 |
| NOX |
5.052 t/a |
5.052 t/a |
|
137.3mg/m3 |
| Mixing equoipment, operation vehicles |
Noise |
Factory boundary:
Daytime
65 dB
Nighttime
55 dB
|
Factory boundary Daytime 65 dB;
Nighttime 55 dB
|
Your message must be between 20-3,000 characters!