Auto compensation 3000KG per batch Hot mix asphalt plant with all dust smoke gas purification
1, About Xitong asphalt mixing plant history
Basing on absorbing the advanced foreign technique, we developed this new-generation facility, which contains mechanical, electrical, and pneumatic technique. It is a special whole set facility, which can produce any hot-mixing asphalt concrete to meet road-engineering requirement. The facility including many advantages, such as reasonable configuration, high-level automation, precise measurement, easy operation, low energy cost, less pollution, stabile mixing quality, and better security.
2. Safety and notice
A． Ensuring the following items before any maintenance or repair of hot mixing batch plan.
⑴. Shut off the main power supply, and make sure the machine is keeping stop.
⑵. Send out operating alarm, and show the alarm signal at essential position.
⑶. When carrying on adjust to try at any rotary place, there must have the specially assigned person to pay attention to control of the urgent stop button.
⑷. When examining and repairing the inner of facility, be sure to shut off any power supply and close electrical control house, and hang the sign of facility overhaul and prohibiting shutting switch.
⑸. Only qualified and capable electrician could operate electrical system after authorization.
⑹. Before restart the machine, send out alarm ring, and inform all the persons to be careful.
⑺. During operation, equip all the security protection all the time.
Maintenance of lubrication for batch type asphalt hot mixing plant
Lubrication schedule
| Item |
Position |
Cycle |
Type |
Remark |
| 1 |
Vibration mesh |
Principal axis bearings |
Everyday |
1# lithium grease |
2～3- shot |
| 2 |
Hot aggregate silo |
Gate shaft bearings |
Every month |
2# calcium base grease |
1- shot |
| 3 |
Mixer |
Principal axis bearings |
3 days |
1# lithium grease |
2～3- shot |
| Gate shaft bearings |
Every month |
2# calcium base grease |
1- shot |
| Large gear |
Every month |
2# calcium base grease |
|
| 4 |
Exhaust fan |
Principal axis bearings |
3 days |
1# lithium grease |
2～3- shot |
| 5 |
Screw conveyor |
End bearings |
3 days |
2# calcium base grease |
1- shot |
| 6 |
Asteroids feeder |
End bearings |
3 days |
2# calcium base grease |
1- shot |
| 7 |
Weighing silo |
Gate shaft bearings |
Every month |
2# calcium base grease |
1- shot |
| 8 |
Finishe-d product
Silos
|
Trolley |
Trolley surfaces |
7 days |
2# calcium base grease |
Protecting inunctions |
| Bearing |
3 days |
2# calcium base grease |
1-shot |
| Door roller |
7 days |
2# calcium base grease |
1-shot |
| 9 |
Wind
lass
|
Reel bearing |
3 days |
2# calcium base grease |
1～2- shot |
| Wire rope |
7 days |
2# calcium base grease |
Protecting inunctions |
| 10 |
Other |
Gate shaft |
7 days |
2# calcium base grease |
1-shot |
| Rope wheel |
7 days |
2# calcium base grease |
1～2- shot |
| 11 |
All adjusting screw |
Every month |
2# calcium base grease |
Protecting inunctions |
Your message must be between 20-3,000 characters!